In-ground Flagpole Hardware

Tough aluminum casting with durable gold finish. For use with In Ground Flag Poles

Available in 6'', 9'', and HD. Cast of strong tenzaloy Aluminum alloy. Center point measurement is 3 inches.

For use with in ground internal flagpoles.   Not sure what size you need? Give us a call! 

The Brass Snap is a clip used on your halyard (rope) to attach your flag. Since the brass snap is stronger than the nylon snap and can accept large...

Cast Aluminum Cap Adapter. Size 5.5" with set screws used to cap the top of a pole and accept the truck assembly Fits over the top of a 5.5" outer ...

The Carabiner Quick Link, is made of stainless steel.  The link is not meant for lifting, but has the capacity to hold 200 lbs. Size: 5/16" ...

The threaded Connecting Link, also known as the C-link is oval shaped and stainless steel.  The link is not meant for lifting, but has the capacity...

Size:9.25 in  Eagle on Ball 1/2" Rod Color:Gold

Eagle top for in-ground flagpoles.  9" and 16" options available.

Size:1/2 in

Did you know? On average, customers save $150 by replacing flagpole parts before they break! Take advantage of this special spring deal!  Don’t ...

For use with Internal flagpoles

Gold Anodized Aluminum ball on a 1/2" threaded rod. Has a locking nut to tighten down onto truck assembly (pulley assembly).  The ball is generally...

Flagpole Halyard (Rope). For use on all Outdoor Flagpoles. Available in different thickness and sold by the foot (price shown is per foot). Most fl...

Heavy Duty Double Revolving Truck To be used on flagpole that is plugged on top to receive 1.25'' NPT (national pipe thread)  Tapped to receive a 1...

Available in Sizes:10 in and 12 in Colors available: Bronze and white

This Non-Tangle Rod prevents the flag from wrapping around outrigger style poles. Material: stainless steel rod with vinyl clamps. Recommend for co...

Available in various sizes. For fiberglass poles.

Nylon Snaps are recommended for Smaller Flag Poles with thinner Halyard (rope) 1/4'' and smaller. This nylon snap is designed to secure your flag t...

Outrigger Style Truck.  For In-Ground flagpoles. Manufactured from strong tenzaloy aluminum alloy. Designed to be used with Annin outrigger poles. ...

White Wire Core Retainer

Silver Anodized Aluminum ball on a 1/2" threaded rod. Has a locking nut to tighten down onto truck assembly (pulley assembly).  The ball is general...

The stainless steel snap is stronger and will last longer than nylon or brass snaps.  When selecting the size of your snap, it's important to take ...

Super Snaps are silent, strong, safe and economical. Suitable for flag sizes 2'x3' to 6'x10'.  Manufactured with 100% nylon. Sold in pairs. The mou...

Snap covers are to be used with Brass and Stainless Steel Snaps.  Covers prevent any marking or scratching on the pole, the sliding of the snap, an...